Remote Legacy Customer ServiceFiLMiC Inc

Remote Legacy Customer Service

  1. Remote Legacy Customer Service
  2. Remote Legacy App Comments & Reviews (2024)
  3. Remote Legacy iPhone Images
  4. Remote Legacy iPad Images

Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5.

Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers wireless control and monitoring of your Filmic Pro experience. Filmic Remote puts your spare iOS devices into the production process.

Remote v3 offers three modes of capability: Control, Monitor and Director.

Control mode provides the familiar Filmic Pro interface for complete remote camera control over hard to reach camera placements such as sliders, jib arms, car mounts, microphone stand or other compelling live event camera placements. Set up your Filmic Pro device and then control all settings and recordings from the Remote:
- Start/Stop record functions.
- Focus/exposure reticle placement and locking.
- Dual arc slider manual controls for focus and exposure.
- Pull-to-point focus and exposure pulls.
- Create and load Filmic Pro presets from Filmic Remote.

Monitor mode gives you cinema production capability for a fraction of the cost, offering a four-up display with the following powerful analytics:
- Video preview: Reference video for use with analytics screens.
- Waveform monitor: Visually identifies signal brightness segmented from left to right across a video feed. Used in conjunction with the video preview it can provide a quick snapshot of brightness in your video.
- Vectorscope: Displays color saturation, by channel, across the entire image.
- Histograms: RGB composite, Luminance, Zone and RGB channel.

Director mode provides a clean video preview. This is perfect for providing a director, producer or crew with a device to monitor the production remotely.

You can switch between modes on the fly to check analytics and composition. Remote can also be set up in ‘preview-only’ mode allowing a camera operator to perform all controls from the device running Filmic Pro and allowing the Remote to be used solely for monitoring.

Create your mobile studio today with Filmic Remote!

Notes:
- The use of Filmic Remote on one iOS device requires the simultaneous use of Filmic Pro on an additional device. Both devices must be running iOS 13 or later.
- Filmic Remote connects to Filmic Pro using Wi-Fi either on an established network or using a peer-to-peer network (for using in areas where a Wi-Fi network is not present).
- Filmic Remote can connect to any iPhone or iPad running Filmic Pro and is not cross platform.

Remote Legacy App Comments & Reviews

Remote Legacy Positive Reviews

Filmic Support is Great!I’m changing my review after getting really great tech support from the Filmic crew. I had an issue of the remote not being able to control both the iPhone 12 and 13 Max Pro as camera A and B because it was calling them the same name, and still doing so after I changed the names of both phones to be different. Turns out the app was using the old names from cache inside the Filmic Pro app - so reinstalling the remote app was not getting it to see the new names! I reinstalled Filmic Pro on both phones and it now sees the new phone names and allows me to control both phones. Thank God they explained it to me and that resolved the issue, now I can control both phones and all is well with the remote app again. Being a one man film crew, I use this app on my iPad to lock the exposure and focus with me as the subject from both camera angles, and for this the app is great!.Version: 3.7.0

It worksThere is lag as others have mentioned but it’s transmitting and controlling over WiFi so it’s to be expected. It’s NOT supposed to be a Teradek system. My issue is switching between 2 iPhones, doesn’t work. Tested with an iPhone 5s and 8 Plus. The Remote app needed to be restarted to display the feed that was not the first one viewed. Even though the other appears in the list of devices, the app had to be quit and restarted to switch to the other device and see video. Both phones are running different version of iOS (12.4.5 and 13.3.1) so possible API differences could be a factor. Dunno..Version: 3.2.1

Great for controlling hard to reach B cameraUsed this for controlling an iPhone 14 placed on a mic stand above a piano keyboard. Able to start and end record function and monitor operation for over an hour. App was running on an iPad Pro 12 inch (2019). Sure beats climbing up on a ladder. Yes there is a lag on the iPad monitor but the iPhone video is pristine. Even with lag I can see pianist’s hands and confirm a good result. Very pleased..Version: 3.7.9

Please address video lagThe app is a good idea in principle but the implementation needs work. The video on my 2020 iPad Pro lags behind the video on my iPhone 11 by 2-3 seconds, which makes the app pretty useless as a viewfinder for blocking motion. I think it would be far more useful if the developers would compress the video by a factor of 5-10 to reduce the lag to a couple hundred milliseconds. I’d much rather sacrifice preview quality to reduce lag..Version: 3.2.1

Firstlight supportI love the capability of this app, though it would be much better if the Filmic Firstlight photo app was also able to be remote controlled by this. That way you could compose the shot, figure out focus, lighting, and colors, all while being in the shot yourself..Version: 3.6.0

Mac support ?Hoping you can support for Mac Catalist to see the iPad app work in macOS as well. Wish it can be viewed in n two devices at the same time, iPad and MacBook. Also be great if we were able to see load Luts to see how it world look if one added a lut after. Not to be recorded with the lut. Just to preview while recording..Version: 3.2.1

Simply fantastic!This is the first day that I started working with the FILMIC PRO REMOTE application. This is fantastic! I wish I had discovered this sooner. Thank you guys for this amazing tool! Piotr.Version: 3.7.5

It worksWorks as intended. 1 star off for the lag, as others mentioned, but impossible to work around that without a tether..Version: 3.7.2

Apple Watch option neededIf I was able to connect this to my watch instead in would help so much imagine.Version: 3.2.1

Simple And Functional, ButIt is locked in the horizontal orientation, so vertical video is displayed within a massive letterbox. Please add vertical orientation support!!.Version: 3.7.9

Please fix the lag. It’s a BIG PROBLEM!!!Lag needs to be fixed. It is a MAJOR PROBLEM!!!!.Version: 3.3.2

BuggyIf it works the way it should, it’s good but it has some shooting-critical bugs which makes it unreliable for my filming setup.Version: 3.7.3

Focus pull lagSo using an iPhone 13 Pro Max regardless of which video format I choose, it seems the focus pull lags based on the older iPad Air 2 I have connected wirelessly. It’s a shame because the shots it takes when trying a focus pull using the lock points is unusable. Without the remote app it’s great, but my plan is to have this phone mounted higher up to shoot some top down B-roll. Hope this can be fixed..Version: 3.7.0

Works ok but can be improved...Hi The remote app is finally back! I have been waiting for this for a long time now, i use my iPhone 6 a lot to film for Youtube videos and it has always been a problem to make sure i am perfectly in focus when shooting greenscreen or anything that i cannot be at the iPhone's screen. But now with this app these problems are no more! But i hoped it would be a little better. The cloned display is sluggish and sometimes just stops working. The app crashes easiely but this is the first release so i expect these bugs to be resolved with later versions. And one thing that i wish will be done later, i want the cloned display to be maximized and still being able to control all settings. Why not just clone the entire source display's screen? Anyway there is no other camera app with a remote function for now so its better than nothing i guess....Version: 2.0

Bad image qualityI have found that it is much easier to use the FilmicPro app alone, but want Remote to work as seeing my shot on a larger screen is much better.... but when I try to switch over to the Remote App after setting up my shot, the app seems to reset itself. Plus the image quality drops, making it look like my shot is out of focus. Making it hard to trust. Is there a reason it uses wifi instead of Bluetooth to connect? It seems like the connection would be stronger..Version: 3.1

Nice but needs improvementCrashed when I first enabled the Osmo feature. Screen problems (1/2 screen) requiring that I close app and restart it. Suffice to say that the app although feature rich has bugs (I'm using an iPhone 7 with the latest IOS 10.2) One feature that I really, really need is hardware zoom for the Osmo which isn't part of this app..Version: 2.1

Awesome!Awesome! The remote v3 interface now matches the look of the FiLMiC Pro app. It's a total breeze to use and very practical for many of my video recording scenarios. I am very happy to have purchased this app :).Version: 3.0

Free International Money Transfer 💸Enjoy high maximum transfers into more than 20 currencies while saving up to 90% over local banks! The cheap, fast way to send money abroad. Free transfer up to 500 USD!AdvertorialVersion: 3.7.11


What do you think Remote Legacy ios app? Can you share your thoughts and app experiences with other peoples?

Please wait! Facebook comments loading...

Remote Legacy iPhone Images
  • Remote Legacy iphone image 1
  • Remote Legacy iphone image 2
  • Remote Legacy iphone image 3
  • Remote Legacy iphone image 4
Remote Legacy iPad Images
  • Remote Legacy ipad image 1
  • Remote Legacy ipad image 2
  • Remote Legacy ipad image 3
  • Remote Legacy ipad image 4